Drag Knife Blades

Drag Knife Blade K68 Solid Carbide Straight Back Blade - 65°/80° Cut Angle - Flat Shaft 0.65" x 4MM (5 pack)

Solid Carbide Straight Back Blade- 65°/80° - Shank 4mm Wide x 0.65 Thick - 13mm Depth of Cut - Single Edge - 5 Pack Very fine drag knife with least overcut; designed to cut small radii and intricate detail. Corrugated Boards - Rubber...

Drag Knife Blade K66 Solid Carbide Straight Back Blade - 65°/85° Cut Angle - Flat Shaft 0.65" x 4MM (5 pack)

Solid Carbide Straight Back Blade- 65°/85° - Shank 4mm Wide x 0.65 Thick - 13mm Depth of Cut - Single Edge - 5 Pack (K66 - 5 pack included with KH2 Holder purchase) Very fine drag knife with least overcut; designed to cut small radii and...

Drag Knife Blade K24 Solid Carbide Dual Edge Widia Blade - 60° Cut Angle - Flat shaft 1.5MM x 8MM (3 pack)

K24 - Solid Carbide Dual Edge Widia Blades - 60° Cut Angle - 20° Wedge - Shank 1.5mm x 8mm - 4.8mm Depth of Cut - 3 PackDual edge allows for twice the amount of cutting than a single blade and with this 60 degree angle, the angle not only adds to...

Drag Knife Blade K16 Solid Carbide Straight Back Blade - 55° Cut Angle - Flat shaft 0.65MM x 5.5MM - 5 pack

Solid Carbide Straight Back Blade - 55° - Shank 5.6mm Wide x 0.65 Thick - Flat Shank - 5.5mm Depth of Cut - Single Edge - Flat - 5 Pack These single edge cutout blades are designed for general cutting through materials up to 5.5mm in depth. This...

Drag Knife Blade K22 Solid Carbide Dual Edge Widia Blade - 50° Cut Angle - Flat shaft 1.5MM x 8MM

K22 - Solid Carbide Dual Edge Widia Blades - 50° Cut Angle - 20° Wedge - Shank 1.5mm x 8mm - 4.8mm Depth of Cut - 3 PackDual edge allows for twice the amount of cutting than a single blade and with this 50° angle of cut. The K22 can...

Drag Knife Blade K23 Blade - 1.5x8mm Flat Shaft - Dimensions 50degree OVL Length 35MM - Max. cutting depth 4.80 mm

K23 - Solid Carbide Straight Back Blade - 35mm Overall Length x 50° -Shank 1.5mm x 8mm - 4.8mm Depth of Cut Same great cutting ability as K22 but straight back allows for cut back operations whereno overcut is needed. Film - Soft Plastics -...

K18 Drag Knife Blade HSS. 0.65MM x 5.6MM Flat Shaft. Single Edge General Purpose Blade. 10 pack. KH1 holder

K18 High Speed Steel Straight Back Blade. 0.65MM x 5.6MM Flat Shaft. Single Edge General Purpose Blade. Packaged as a 10 pack. Fits KH1 Holder. These single edge cutout blades are designed for general cutting through materials up to 5.5mm in depth...

Drag Knife Blade K71 Solid Carbide 1MM x 8MM Flat shaft. 0,15,30 and 45 Degree V-Cut Blade Maximum Depth of Cut Based on Angle.

K71 Solid Carbide Straight Back Blade 1MM x 8MM Flat shaft. 0,15,30 and 45 Degree V-Cut Blade Maximum Depth of Cut Based on Angle. Stable, long-life carbide blade Applications include corrugated honeycomb display board, cardboard, foamboard, carpet and...

Drag Knife Blade K27 1.5mm x 5mm Flat Shaft. Combo Profile 5° x 2.8mm Tip/81.5° - 31mm Overall Length - 20mm Depth of Cut.

K27 Straight Back Blade. 1.5mm x 5mm Flat Shaft. Combo Profile 5° x 2.8mm Tip/81.5° - 31mm Overall Length - 20mm Depth of Cut. Very robust, heavy-duty oscillating blade. Applications include foils, films, tarpaulin, polypropylene,...

Drag Knife Blade K26 Solid Carbide Straight Back Blade 1.5mm x 5mm Flat Shaft. Combo Profile 55° x 2.8mm Tip/81.5° - 28mm Overall Length - 16.5mm Depth of Cut.

K26 Solid Carbide Straight Back Blade 1.5mm x 5mm Flat Shaft. Combo Profile 55° x 2.8mm Tip/81.5° - 28mm Overall Length - 16.5mm Depth of Cut. Pointed Oscillating Blade. Applications include folding carton, cardboard, foams, felt, polyester...