Knife Blades

Oscillating Blade K2 Solid Carbide-6MM Round Shank-6MM Cut Length Round Point. Blade tip is at center of rotation. 36MM Overall Length. Oscillating Blade. Fits KH6 Holder

K2 Solid Carbide-6MM Round Shank-6MM Cut Length Round Point. Blade tip is at center of rotation. 36MM Overall Length. Oscillating Blade. Can be used to drag, or oscillate. Used in Holder KH6.

Drag Knife Blade K66 Solid Carbide Straight Back Blade - 65°/85° Cut Angle - Flat Shaft 0.65" x 4MM (5 pack)

Solid Carbide Straight Back Blade- 65°/85° - Shank 4mm Wide x 0.65 Thick - 13mm Depth of Cut - Single Edge - 5 Pack (K66 - 5 pack included with KH2 Holder purchase) Very fine drag knife with least overcut; designed to cut small radii and...

Drag Knife Blade K24 Solid Carbide Dual Edge Widia Blade - 60° Cut Angle - Flat shaft 1.5MM x 8MM (3 pack)

K24 - Solid Carbide Dual Edge Widia Blades - 60° Cut Angle - 20° Wedge - Shank 1.5mm x 8mm - 4.8mm Depth of Cut - 3 PackDual edge allows for twice the amount of cutting than a single blade and with this 60 degree angle, the angle not only adds to...

Drag Knife Blade K16 Solid Carbide Straight Back Blade - 55° Cut Angle - Flat shaft 0.65MM x 5.5MM - 5 pack

Solid Carbide Straight Back Blade - 55° - Shank 5.6mm Wide x 0.65 Thick - Flat Shank - 5.5mm Depth of Cut - Single Edge - Flat - 5 Pack These single edge cutout blades are designed for general cutting through materials up to 5.5mm in depth. This...

Drag Knife Blade K22 Solid Carbide Dual Edge Widia Blade - 50° Cut Angle - Flat shaft 1.5MM x 8MM

K22 - Solid Carbide Dual Edge Widia Blades - 50° Cut Angle - 20° Wedge - Shank 1.5mm x 8mm - 4.8mm Depth of Cut - 3 PackDual edge allows for twice the amount of cutting than a single blade and with this 50° angle of cut. The K22 can...

Decagonal (10-sided) Rotary Blade. Solid Carbide. Used in DRT (Driven Rotary Tool) DRT3

10 Sided Rotary Blade. 32MM Diameter x 8MM Bore x 0.6MM thick x 7MM Maximum Depth of cut. Used in DRT (Driven Rotary Tool Head). Recommended materials. Aramid fiber. Carbon fiber. Fabric. Felt. Glass fiber. Leather hide. Non-woven fabric. Nylon fabric...

Decagonal (10-sided) Rotary Blade. Solid Carbide. Used in DRT (Driven Rotary Tool) DRT2

10 Sided Rotary Blade. 28MM Diameter x 8MM Bore x 0.6MM thick x 5MM Maximum Depth of cut. Used in DRT (Driven Rotary Tool Head). Recommended materials. Aramid fiber. Carbon fiber. Fabric. Felt. Glass fiber. Leather hide. Non-woven fabric. Nylon fabric...

Decagonal (10-sided) Rotary Blade. Solid Carbide. Used in DRT (Driven Rotary Tool) DRT1

10 Sided Rotary Blade. 25MM Diameter x 8MM Bore x 0.6MM thick x 3.5MM Maximum Depth of cut. Used in DRT (Driven Rotary Tool Head). Recommended materials. Aramid fiber. Carbon fiber. Fabric. Felt. Glass fiber. Leather hide. Non-woven fabric. Nylon fabric...

Drag Knife Blade K23 Blade - 1.5x8mm Flat Shaft - Dimensions 50degree OVL Length 35MM - Max. cutting depth 4.80 mm

K23 - Solid Carbide Straight Back Blade - 35mm Overall Length x 50° -Shank 1.5mm x 8mm - 4.8mm Depth of Cut Same great cutting ability as K22 but straight back allows for cut back operations whereno overcut is needed. Film - Soft Plastics -...

K18 Drag Knife Blade HSS. 0.65MM x 5.6MM Flat Shaft. Single Edge General Purpose Blade. 10 pack. KH1 holder

K18 High Speed Steel Straight Back Blade. 0.65MM x 5.6MM Flat Shaft. Single Edge General Purpose Blade. Packaged as a 10 pack. Fits KH1 Holder. These single edge cutout blades are designed for general cutting through materials up to 5.5mm in depth...